Electrolux 534178 Specification Sheet

82" Multi Tank Conveyor Dishwasher
Warewashing
82" Multi Tank Conveyor Dishwasher
WT82
534178 (WT82BL208)
534179 (WT82BR208)
534180 (WT82BL240)
534181 (WT82BR240)
Short Form Specification
Item No. ___________________________________
Unit to be Electrolux WT82 Hot Water Sanitizing 82" multi tank
conveyor dishwasher with built in 40 °F rise hot water booster. Electrical
characteristics to be ____ 208 V or ____ 240 V three phase operation.
Unit to operate from ___ left to right or ____ right to left. Wash zone with
two individual wash pumps. 3 HP wash pump for top wash arms and 1.5
HP wash pump for lower wash arms. Unit to feature 23" DUO rinse area
with atmospheric built in booster system and built in rinse booster pump
thus guaranteeing rinse pressure during rinse cycle. Unit to feature two
conveyor speeds which can be selected from the control panel by the
operator, 250 racks/hour or 350 racks/hour. Maximum water consump-
tion at 250 racks/hour of only 87 gal/hour (0.3 gal/rack). Unit to feature
large heat and noise insulated front counter balanced door in wash and
rinse tanks for easy access of internal components. Unit to feature as
standard end of day self cleaning cycle. Drain of water from the machine
can be done through the control panel. Large deep drawn 40 gal wash
tank for extended wash sessions.
Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check-
up after one year from installation.
Approval: ___________________________________________
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
Warewashing
WT82
82" Conveyor Dishwasher.
Left to Right - 208 V
82" Conveyor Dishwasher.
Right to Left - 208 V
82" Conveyor Dishwasher.
Left to Right - 240 V
82" Conveyor Dishwasher.
Right to Left - 240 V
3048424
Electrolux Professional, Inc.
www.electroluxusa.com/professional
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
Unit to feature built in 40 °F rise booster heater to heat up incoming
•
140 °F water to 180 °F (min) for the final sanitizing rinse.
• DUO Rinse. Unit to feature 23" rinse tank with two rinse arms (top and bottom).
• Large 40 gallon wash tank with two wash pumps. 3 HP wash pump for top
wash arms and 1.5 HP wash pump for lower wash arms. Wash arms specifically
designed for maximum soil removal.
• Built in atmospheric booster system with air break.
• Built in rinse booster pump guarantees constant rinse pressure.
• Speed of conveyor can be set through the control panel by the operator.
250 racks/hr or 350 racks/hr.
• Large counter balanced inspection doors in wash and rinse sections allow
unrestricted all round access to the wash and rinse area. Door is insulated with
injected foam. This adds strength as well as reduces noise and heat loss.
• Large filters sloping towards the front to the smaller pressed filter box for quick
removal. Filters feature holes smaller than the concave ant-block wash nozzles so
large food cannot enter and block the wash system. Filters easy to remove from
pre wash as well as wash sections.
• Adjustable feet for full access underneath the machine for cleaning.
• Push button self cleaning cycle of all tanks for ease of "end of day" cleaning.
• Rinse chamber without internal pipes and therefore no hidden dirt traps.
• Wash chamber without internal pipes and therefore no hidden dirt traps.
• Self draining wash pumps provide maximum hygiene with no smells and all
wash and rinse zones drain automatically at the push of a button.
• Heavy duty stainless steel wash pump (impeller and housing).
• Deep drawn pressed 40 gal wash tank with fully rounded corners, sloped towards
the drain to prevent dirt build up provides fast drainage in only a few minutes.
Pressed wash tank with no welded points offer a guaranteed water tight solution.
• Dishwasher structure is held together with a solid 2" × 2" stainless steel tube
sub-frame to provide long term sturdiness.
• All main components made in heavy duty anti-corrosive 304 type stainless steel:
tanks, panels, wash & rinse arms and caps, doors, front, handle, rear and side-
panels and rack transportation system.
• Wash and rinse arms can be easily removed for cleaning.
• IPX5 (NEMA4) water protection ensures no damage from cleaning.
• Autostart/stop ensures that the machine runs only when a rack is passing
through it. This reduces both water and energy consumption.
• Internal curtains made of silastic material and are not affected by detergent or heat.
• Electronic control panel features large display for reading of wash and rinse
temperatures.
• Low water consumption. At 350 racks per hour, the machine uses only 87 gal/hr
(0.3 gal/rack).
• Machine predisposed for external detergent and rinse aid connections.
Included Accessories
• Vent cowls (left and right side).
• One open sided dishwasher rack for trays.
• Rack for cups.
• Rack for dinner plates.

Optional Accessories

• Ventilation activation kit.