Blood Pressure Kit Components; Assembly Instructions; Taking Your Blood Pressure - LifeSource UA-100 Instruction Manual

HOME BLOOD PRESSURE KIT COMPONENTS
Vinyl Carrying Case
Calibration
Screwdriver
Y-Tube
Right Bladder Tube
Left Bladder Tube
Manometer
List of Components:
Ear tips Left Bladder Tube
Binaurals Right Bladder Tube
Inflation Bulb Y-Tube
Air Release Valve Cuff D-Ring
Manometer Cuff
E-2
LifeSource Health Line (Toll-Free): 1-888-726-9966
Stethoscope Head
Cuff D-Ring
Cuff
Ear tips
Binaurals
Inflation Bulb
Air Release Valve
Stethoscope Head
Vinyl Carrying Case
Calibration
Screwdriver

ASSEMBLY INSTRUCTIONS

Place cuff with arrow pointing towards you.
1.
Make sure cuff end has been inserted through the D-Ring.
2.
Insert single end of the Y-Tube into stethoscope head.
3.
4. Insert each arm of the Y-Tube into each bottom end of the
binaurals.
5. Insert air release valve into left bladder tube.
6. Insert manometer into right bladder tube.

TAKING YOUR BLOOD PRESSURE

Tips for Blood Pressure Monitoring:
• Relax for about 5 to 10 minutes before measurement.
• Remove constricting clothing and place cuff on bare arm.
• Unless your physician recommends otherwise, use left arm to
measure pressure.
LifeSource Health Line (Toll-Free): 1-888-726-9966
E-3