Picture Adjustment - Toshiba 24HV10UM Owner's Manual

Picture adjustment

Selecting the Picture Size
1
Press until the Picture Size list appears
on the screen, then press s or r to select
the appropriate Picture Size (or press
repeatedly to select the desired Picture Size
directly).
Picture Size
Wide
4:3
Super Live
2
Press OK.
Wide
Use this setting when watching a wide-screen
DVD, widescreen video tape or a 16:9 broadcast
(when available). Due to the range of wide-
screen formats (16:9, 14:9, 20:9 etc.), you may
see bars on the top and bottom of the screen.
4:3
Use this setting to view a true 4:3 broadcast.
Super Live (only analogue aerial and standard
video input sinal)
This setting will enlarge a 4:3 image to fit the
screen by stretching the image horizontally,
holding better proportions at the centre of the
image. Some distortion may occur.
PC Normal (only HDMI signal input)
Use this setting for PC connected via HDMI
terminal when receiving PC signal format. This
setting will display the image correctly without
distortion or picture clipping.
PC Wide (only HDMI signal input)
Use this setting for PC connected via HDMI
terminal when receiving PC signal format. This
setting will display the image without picture
clipping.
Notes:
• Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video programme, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
Activating the picture quality
You can adjust the basic picture quality.
1
From the PICTURE menu, press s or r to
select either Backlight, Contrast, Brightness,
Colour, Tint or Sharpness and press OK.
2
Press v or w to adjust the settings.
Selecting the Colour Temperature
You can change the tone of the picture by
selecting from three preset colour temperatures:
Cool, Natural or Warm.
1
From the PICTURE menu, press s or r to
select Colour Temperature.
2
Press v or w to select mode you prefer.
Cool : Lends a blue hue to the picture.
Natural : Neutral
Warm
: Lends a red hue to the picture.
Activating the Noise Reduction
If the receiving signal is weak and the picture is
blurry, the picture may be improved when using
this function.
1
From the PICTURE menu, press s or r to
select Noise Reduction.
2
Press v or w to select Off, Low, Middle or
High.
Resetting the PICTURE settings
1
From the PICTURE settings menu, press s
or r until Reset is selected and press OK.
– 12 –