Pop (Picture-Over-Picture) - JVC BlackCrystal JLE32BC3001 User Manual

7
Press or to select "Position", then press
8
to select where you want to display the second screen, then press OK.
Press or
9
Press or to select "Size", then press
10
to select the screen size, then press OK.
Press or
11
Press or to select "Audio", then press
12
to select an option, then press OK. Options are:
Press or
• "Main": The output audio is from the main input source.
• "PIP/POP": The output audio is from the secondary input source.
13
Press OK.
14
Press to return to the previous screen or press RETURN to close the menu screen.

POP (Picture-Over-Picture)

With POP, you can select a second input source and display its output over the main input source
picture. The picture size and position are the same with the main input source.
1
Press MENU.
2
to select "PIP", then press or OK.
Press or
3
to select "PIP Mode", then press or OK.
Press or
4
to select "POP", then press or OK.
Press or
5
Press or to select "Source", then press
6
Press or to select the second input source, then press
Note: Some input sources do not support this feature. See the PIP/POP Table on page 37.
7
Press or to select "Audio", then press
8
to select an option, then press OK. Options are:
Press or
• "Main": The output audio is from the main input source.
• "PIP/POP": The output audio is from the secondary input source.
9
Press OK.
10
Press to return to the previous screen or press RETURN to close the menu screen.
34
Adjusting the Menu Settings
or OK.
or OK.
or OK.
or OK to enter the submenu.
or OK.
or OK.