Custom Search - Uniden BC75XLT Owner's Manual

to the nearest valid frequency. For example, if you enter
151.473 (MHz), your scanner accepts it as 151.475.
However, if you enter a frequency that is out of range,
the scanner sounds an error tone and
Enter another frequency.
Press Srch. The scanner searches, starting from the
3.
frequency you just entered. (Turn the scroll control
knob to change the search direction.) The scanner also
automatically turns on the delay function;
To turn off the function, press Func + Dly (see page 47).

Custom Search

You can adjust each preset search range's upper and lower
frequency limits.
Press Func + Psrc. The scanner enters Custom Search
1.
mode and displays
lower frequencies for Custom Search range 1 alternate.
2. Turn the scroll control knob to scroll through the rest
of Custom Search ranges until you find the one you
want. The search range numbers at the top of the screen
change as you cycle through them.
Enter the lower limit frequency and press E . The
3.
frequency range flashes with the adjusted lower limit
frequency.
Enter the upper limit frequency and press E . The
4.
adjusted frequency range flashes with the adjusted
upper limit frequency (both upper and lower
frequencies are now adjusted).
and
SRCH PGM
36
appears.
Error
displays.
DLY
. The upper and