60-Gb 40-Gb 30-Gb - HP 2200 - Presario - 16 MB RAM Maintenance And Service Manual

Removal and Replacement Procedures
Hard drives (all 4200 rpm)
60-GB
40-GB
30-GB
5. Remove the hard drive by following these steps:
a. Remove the 2 rubber screw covers 1 that conceal the hard
✎
b. Remove the 2 PM2.0×6.0 screws 2 that secure the hard
c. Use the notch in the hard drive bezel to slide the hard
d. Remove the hard drive.
Removing the Hard Drive
5–6
Spare Part Number Information
drive retention screws.
Spare part number 371808-001 should be used to replace
the hard drive rubber screw covers.
drive to the notebook.
drive forward 3.
Maintenance and Service Guide
371778-001
371777-001
371776-001