Reference Sections; Troubleshooting - Bush S624D Instruction Manual

D
Press PLAY/PAUSE during the slide show to pause
on one image.
E
Press the or
image or return to the previous one.
PLAYING AN AUDIO CD
A
Insert a CD in the same way as you would a DVD,
with the label facing away from you.
B
The CD will load and a menu of the disc's contents
will appear on screen.
C
Use the and
you wish to play and press PLAY/PAUSE, or just
press PLAY/PAUSE to listen to the whole CD from
the beginning.
You can stop, pause, fast forward or fast rewind a
CD in the same way as a DVD. You can also use the
REPEAT button to repeat a track, folder album or
the contents of the whole disc. Press repeatedly to
select what you would like to repeat. You can also
use the A-B function to repeat a certain section of
a track or CD.
Protect your DVD
discs
HANDLE DISCS PROPERLY
Do not touch the playback side of the disc.
Do not attach paper or tape to the disc.
HOW TO CLEAN A DISC
Fingerprints and dust on the disc cause picture and
sound deteriation. Wipe the disc with a soft cloth
from the centre outwards
If you cannot wipe off the dust with a soft cloth,
wipe the disc lightly with a slightly moistened soft
P.24
button to skip to the next
buttons to highlight the track
cloth and finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or
antiseptic spray for vinyl LPs. It may damage
the disc.
05
Reference
sections

Troubleshooting

To assist in location of possible faults use
the help guide below:
No picture, no
sound
Blank screen
No sound
Poor sound
No picture in
some channel
BUSH | HD Ready LCD TV | User Manual | Helpline: 0845 604 0105
Verify if the television is
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Refer to user's manual for
adjustment.
Verify if correct channel is
selected.
Adjust the antenna.