Uide; T Roubleshooting - GE 210952 - 2.4GHz Cordless Phone User Manual

T
ROUBLESHOOTING
T S
ELEPHONE OLUTIONS
No dial tone
• Check or repeat installation steps.
• Make sure base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
modular phone jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Make sure the battery is properly charged (16 hours).
• Make sure the battery pack is installed correctly.
• Did the handset beep when you pressed the talk/callback button? Did
the charge/in use indicator on the base turn on? The battery may need
to be charged.
• Place handset in cradle for at least 20 seconds to reset.
Dial tone is OK but can't dial out
• Make sure the TONE/PULSE setting on the base is programmed to the
type of phone service you are subscribed to.
Handset/Base does not ring
• Make sure the handset ringer setting is on and the base ringer is
programmed to HI.
• The cordless handset may be out of range of the base. Move closer to
the base.
• You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
54
G

UIDE