Symantec 360R - Security Gateway SGS Administration Manual page 178

178 Field descriptions
Firewall field descriptions
Table C-18 Computers tab field descriptions (Continued)
Section Field
Application Reserve Host
Server
IP Address
Session Bind with WAN
Associations - port (Model 360/
Optional 360R)
Bind with PPPoE
Session
Host List Host Name
Adapter (MAC)
Address
App Server
Computer Group
PPPoE Session
Description
Adds the MAC address (that you specified in the
Adapter (MAC) Address text box) to the
appliance's DHCP server so it is always assigned
to the IP address that you specify in the IP
Address text box. This is required for application
servers.
Checking this check box ensures that the DHCP
server always offers the defined IP address to
the computer you are defining, or you can set
this IP address as a static address on the
computer.
Defines the IP address of the application server.
Binds this computer to a particular WAN port so
that its traffic only goes out through that WAN
port. This is useful if you have two broadband
accounts configured, one for each WAN port,
and you want that computer's traffic to go
through only one of the ISPs.
Displays all the PPPoE sessions that you can
bind to access groups and rules:
Session 1
■
Session 2
■
Session 3
■
Session 4
■
Session 5
■
Only select a session if your ISP service includes
multiple PPPoE sessions.
Name of the host (a computer on your internal
network).
Physical address of the host's network interface
card (NIC), usually an Ethernet or wireless card.
IP address of the application server.
Computer group to which the host is assigned.
PPPoE session to which the host is bound.