Advertisement
Features and Functions of the 3D/LH Series
Still Frame Display
A frame of video can easily be
frozen and displayed as a still
image on the left side of the
screen. This function can be
used to match a live camera with
a frame of video shot at an
earlier time or with a different
camera. There are two display modes: FULL for displaying and
comparing the entire image on the screen, and PART for displaying
and comparing only the center part of the images. (Full-only on
BT-3DL2550/LH2550)
2-Input Split-Screen Function
The BT-3DL2500/LH2550 simultaneously displays two images
side-by-side from two video inputs. This is especially useful for
combining CGs and actual images. Because a single monitor can
temporarily serve as two
monitors, it helps to save space.
It is also possible to set the size,
color space, and gamma and
RGB gains individually for each
input.
*It may not be possible to display
both images simultaneously with
certain input signal
combinations.
Audio Level Meter Overlay
The BT-LH910G is equipped with
a color audio level meter. This
meter displays the level of
embedded audio (3G SDI, SDI,
HDMI*) input. Reference point
setting, peak hold and overrange
display are also possible. In
other models, the skeleton bar
meter displays the audio level of
SDI embedded audio input on
the screen. The display mode
can be selected from 2-channel,
4-channel, 8-channel or OFF.
* 2-channel display for HDMI
input.
HV Delay Display and Mono Mode
The HV Delay function that displays the video blanking period, and
the Mono mode that switches the display to black-and-white, can
be assigned to function keys for quick access.
* In the BT-3DL2550, this function is supported only in 2D mode.
Time Code Display Function
With HD-SDI input, this function
displays the value of the VITC,
LTC or UB time code.
Closed Caption Function
The BT-LH910G can display
closed captions with an SDI or
VIDEO input. It supports the
EIA-708 HD-SDI closed
captioning standard (EIA-608
SD-SDI closed captioning
standard), and can display up to
eight windows simultaneously.
Other models can display closed
captions (32 characters x 15
lines) when an NTSC video
signal is input. The display mode can be selected from CC1, CC2,
CC3 or CC4.
* In the BT-3DL2550, this function is supported only in 2D mode.
Still
Video Monitor
FULL mode (4:3)
2-Input Split-Screen Function
(Left: SDI Input, Right: DVI Input)
BT-LH910G Color Audio Level Meter
8ch Audio Level Meter
Time Code Display
Closed Caption Display
Calibration Function
The BT-3DL2550/LH2550/
LH910G comes installed with
software that allows it to be
calibrated without using a PC, by
simply connecting a
manufacturer-designated display
color analyzer and measurement
probe to the monitor.
*Konica Minolta CA-310 Display Color Analyzer with CA-PU32/PU35 or CA-PSU32/PSU35
Standard Measurement Probe. For more information about the Konica Minolta calibration
system, please see the following website.
<http://www.konicaminolta.com/instruments/index.html>.
* Not equipped in the BT-LH1760/LH1710.
Cine Gamma Compensation
The cine-gamma (F-REC) compensation function enables
compatibility as a monitor for a Varicam Camcorder. This function
supports the production of movies, film-like HDTV programs, and
TV commercials.
The BT-LH910G is equipped with a black mode that also makes
dark image areas in low-gradation scenes easier to see. It helps for
producing movies as well as film-like HD programs and
commercials.
Function Keys
Each of the function keys on the front panel can be assigned a
function selected from various display and switchover functions* to
enable one-touch display ON/OFF or mode change. These function
buttons speed up operation and customize the functions to
individual user needs.
* Assignable functions vary depending on the model. In the BT-3DL2550, functions that
can be used vary in 3D display and 2D display.
Rugged Frame Structure
The BT-LH1760/LH1710 feature
an aluminum diecast frame (front
section only), while the
BT-LH910G has a magnesium
diecast frame.
These rugged structures provide
the toughness required in
professional field work.
* Not provided in the BT-3DL2550/LH2550.
External Remote Compatibility
The standard RS-232C (9-pin) and GPI (9-pin) remote input
terminals allow the monitor to be operated by an external device.
Tally Lamps
The front panel has red, green and amber tally lamps.
The BT-LH910G also has a rear tally lamp for added convenience
when being used as a viewfinder.
Power Save Mode
When no signal is received for 60 continuous seconds, the Power
Save mode is activated to minimize power consumption.
* Not provided in the BT-LH910G.
Wall Mounting
The optional wall mounting hardware (optional BT-WMA17G or
BT-WMA26G) allows wall mounting of these thin, lightweight LCD
monitors.
* Not supported by the BT-LH910G.
Protective Panel
The optional protective panel (BT-PRP17G) protects the
BT-LH1760/LH1710 LCD panel from environmental elements such
as sand and dust during outdoor use.
3D/LH Series
Aluminum diecast frame
(BT-LH1760/LH1710)
6
Advertisement
