Brother Quattro 2 6700D Operation Manual page 33

4. Specifying the Stitch Density
1
Press or
(The default setting is 100 % when the application is
started up.)
To select a coarser density, press
density, press
←
→
90 %
Setting examples
90 % (coarse) 100 % (standard)
Notes
• It is recommended that a finer stitch density be selected if a detailed
drawing is created.
• If areas of the embroidery shrinks when a trial embroidery of the
design is sewn, specify a coarser stitch density. Continue sewing
trial embroidery while adjusting the stitch density.
2
After the desired settings are specified, press
The screen returns to the one displayed before the
stitch settings screen was displayed.
beside .
. To select a finer
.
←
→
100 % 110 %
110 % (fine)
.
33