Canon PowerShot ELPH 115 IS User Manual page 8

Hide thumbs Also See for PowerShot ELPH 115 IS:
Table of Contents

Advertisement

Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically, and using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity
of the electrical outlet or wiring accessories. Do not use if the power
cord or plug are damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the camera in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
ELPH 130 IS
IXUS 140
ELPH 120 IS
IXUS 135
Do not play the supplied CD-ROM(s) in any CD player that does not
support data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audio CD player (music player).
Additionally, this could damage the speakers.
Caution
Denotes the possibility of injury.
When holding the camera by the strap, be careful not to bang it, subject
it to strong impacts or shocks, or let it get caught on other objects.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
Caution
Denotes the possibility of damage to the equipment.
Do not aim the camera at bright light sources (such as the sun on a
clear day).
Doing so may damage the image sensor.
When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
This may cause the product to malfunction.
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials
stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build-up and damage to the unit.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents