Brother PED-BASIC Instruction Manual page 7

After a short while, the first Add New
3
Hardware Wizard dialog box appears.
Click [Next].
When using XP, select "Install from a list
or specific location (Advanced)" on the
first Wizard screen and click [Next].
Make sure that "Search for the best
4
driver for your device.
(Recommended)" is selected, and then
click [Next].
Insert the enclosed CD-ROM into the
5
computer's CD-ROM drive.
Select "CD-ROM drive", and then
6
after 5 to 10 seconds, click [Next].
Depending on the operating system, the
dialog box shown in step 9 may also
appear;
described in step 8 should be performed
before continuing to step 9.
When UsbWriter appears, click [Next].
7
Depending on the operating system, the
message "No digital signature." may
appear; however, the installation can be
continued.
When the dialog box shown at the
8
right appears, click [Finish].
This completes the installation of the driver
software.
A message may appear, indicating that
the computer should be restarted; how-
ever, it is not necessary to restart yet, so
click [Cancel].
however, the operation
3