How To Use Walking Foot (Optional Accessory) - Brother PC-3000 Operation Manual

HOW TO USE WALKING FOOT (OPTIONAL ACCESSORY)

This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These
materials are difficult to be fed when sewing but this foot can prevent such materials from crumpling, slipping
or stickking between presser foot and materials thanks to even feeding upper and lower materials.
• You can use walking foot for sewing STRAIGHT STITCH (
• This can be used for only 7 mm (stitch width).
Note
You can not use this foot for sewing other patterns.
Please sew in slow to medium speed.
·
1 Connecting lever
2 Presser bar holder
1. Raise the needle and turn the power off.
2. Raise the presser foot and remove the presser foot.
3. Loosen the presser foot holder screw and remove the presser
foot holder.
4. Position the connecting lever of Walking foot on the needle
fixing screw and install Walking foot on to the presser bar. Lower
the presser foot and tighten the presser foot holder screw.
) and ZIGZAG STITCH ( ).
97