Brother PC-3000 Operation Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Sewing Machine
  5. PC-3000
  6. Operation manual

Brother PC-3000 Operation Manual

Users manual - english
Hide thumbs Also See for PC-3000:
Table of Contents

Advertisement

Quick Links

See also: Manual
®

SEWING MACHINE

OPERATION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Brother PC-3000

Summary of Contents for Brother PC-3000

  • Page 1: Sewing Machine

    ® SEWING MACHINE OPERATION MANUAL...
  • Page 2 “IMPOR TANT SAFETY INSTRUCTIONS” When using a sewing machine, basic safety precautions should always be taken, including the following: “Read all instructions before using.” DANGER – To reduce the risk of electric shock. 1. The sewing machine should never be left unattended while plugged in. Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning.
  • Page 3 FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY. If your sewing machine is fitted with a three-pin non-rewireable BS plug then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug fitted.
  • Page 4 CONGRATULATIONS ON CHOOSING A BROTHER COMPUTER SEWING MACHINE Your machine is the most advanced computerized home use sewing machine available. To fully enjoy all the features incorporated into it, we suggest that you study this booklet. PLEASE READ BEFORE USING YOUR SEWING MACHINE For safe operation 1.

  • Page 5: Table Of Contents

    CONTENTS CHAPTER 1 2. UTILITY STITCHES ..........35 BEFORE USE STRAIGHT STITCHES ........35 Sewing stretch fabrics ........36 ........... 4 Changing the stitch length ......36 PART NAMES ............4 Changing the needle position ...... 36 OTHER ENCLOSED ACCESSORIES ....6 ZIGZAG STITCHES ...........
  • Page 6 3. FONTS AND DECORATIVE STITCHES ..........76 FONT STITCHES ..........76 Combining characters ........77 DECORATIVE STITCHES ......... 78 Selecting a decorative stitch ......79 Combining decorative stitches ..... 79 CORRECTING A PATTERN COMBINATION ..80 CHANGING THE SIZE ........81 Changing the size of a decorative stitch ..

  • Page 7: Before Use

    BEFORE USE CHAPTER 1 PART NAMES 1– Handle A– Main power switch and connectors 2– Spool cap B– Accessory compartment 3– Thread guide for bobbin winding C– Selection keys 4– LCD (liquid crystal display) D– Operation buttons 5– Needle threader lever 6–...
  • Page 8 A. MAIN POWER SWITCH AND CONNECTORS 1 Main power switch Use to turn on/off the main power. 2 Foot controller jack Use to connect the foot controller. 3 Power cord Use to connect the machine to the power sup- ply. CAUTION –...

  • Page 9: Other Enclosed Accessories

    Note (For U.S.A. only) Foot controller: Model N5V This foot controller can be used for sewing machine model PC-3000. OPTIONAL ACCESSORIES 1– Walking foot* Parts code: X81065-001 2– Side cutter Parts code: X81028-001 3–...

  • Page 10: Display Panel

    DISPLAY PANEL 02 03 16 17 18 19 20 21 22 23 24 25 26 27 info cfm clear memory enter C. DISPLAY PANEL 1 Stitches and patterns The utility stitches (00 ~ 29). 2 Screen The number of the selected stitch, the patterns, suggested presser foot and any messages or errors are shown here.

  • Page 11: Operation Buttons

    OPERATION BUTTONS Using the operation buttons D. OPERATION BUTTONS 1 Speed range control lever Slide this lever to change the sewing speed. 2 “NEEDLE POSITION” button Press this button to move the needle either up or down. 3 “REVERSE STITCH” button Hold down this button to sew either backwards START STOP...

  • Page 12: Power Supply

    POWER SUPPLY WARNING – When leaving the sewing machine unattended or when it is not being used, turn off the main power switch of the machine or remove the plug from the wall outlet. CAUTION – Do not use this sewing machine with extension cords or multi-plug adaptors, otherwise a fire or an electric shock may occur.

  • Page 13: Screen

    SCREEN 1 Shows the presser foot symbol. 2 Shows whether the automatic reinforcement stitching is turned on or off. 3 Displays an example of the selected stitch and any messages or errors. 4 Shows the number of the selected stitch. 5 Shows the width of the stitch.

  • Page 14: Language Selection Key

    LANGUAGE SELECTION KEY Example: To change the display language to Spanish. 1. Turn off the sewing machine, then while hold- ing down the information key, turn the sewing machine on again. 2. Press the “ ” stitch length key five times. 3.

  • Page 15: Clearing The Language Selection

    Clearing the language selection Example: To change the display language from Spanish back to English 1. Turn off the sewing machine, then while hold- ing down the information key, turn the sewing machine on again. 2. Press the “ ” stitch length key five times. 3.

  • Page 16: Bobbin Winding / Bobbin Thread Setting

    BOBBIN WINDING / BOBBIN THREAD SETTING Winding the bobbin and setting the bobbin thread CAUTION Be sure to use the specified bobbin (part code 136492-151). Using a different bobbin may result in injuries or damage. 1. Connect the machine to the power supply and turn on the main power.
  • Page 17 3. Pass the thread through the thread guide as shown by the arrows. 4. Align the groove in the bobbin with the spring on the shaft and place the bobbin on the bobbin winder shaft. Then, push the bobbin winder shaft to the right. 1 Spring on the shaft 2 Groove of the bobbin 5.

  • Page 18: Setting The Bobbin

    Setting the bobbin 1. Slide open the bobbin cover. 1 Bobbin cover 2 Bobbin cover release button 2. Insert the bobbin into the shuttle with the thread direction as shown in the diagram. 3. Guide the thread end through the slit, then pull the thread to- ward you to cut off any excess thread.

  • Page 19: Upper Threading

    UPPER THREADING Note When threading the sewing machine, be sure that one of the presser foot mentioned in this Operation Manual is installed. 1. Raise the presser foot lever. (If the presser foot is not raised, the upper thread cannot be threaded.) Note In order to ensure that the upper threading is done correctly, this sewing machine is equipped with an upper threading shutter which...
  • Page 20 4. While holding the end of the thread with your left hand, pass the thread through the guides in the order shown by the num- bers. Note If the thread is pushed down at 1 to make it taut, it can be passed around the other thread guides more easily.

  • Page 21: Using The Extra Spool Pin And The Net

    Rotating your right hand slightly to check that the thread is engaged. 11. While gently holding the thread, raise the needle threader le- ver. 12. Pull the thread towards the rear to finish the upper threading. 13. Pass the thread underneath the presser foot and pull it out from the rear of the machine by about 5 cm.

  • Page 22: Starting And Stopping Sewing

    STARTING AND STOPPING SEWING “START/STOP” button 1 Place the fabric under the presser foot, lower the presser foot, and then press the “START/STOP” button. The sewing ma- chine starts sewing. Slide the speed range control lever to adjust the sewing speed. Hold down the “START/STOP”...

  • Page 23: Selecting A Stitch (Utility Stitches)

    SELECTING A STITCH (UTILITY STITCHES) This sewing machine is equipped with 30 built-in utility stitches. Use the stitch selection keys to enter the number of the stitch that you wish to use. A two-digit number must be entered when selecting the stitch. The se- lected stitch is shown on the screen.

  • Page 24: Quick Adjustment Reference Chart For Stitch Width And Stitch Length

    Quick adjustment reference chart for stitch width and stitch length Stitch width [mm (in.)] Stitch length [mm (in.)] Stitch width [mm (in.)] Stitch length [mm (in.)] STITCH STITCH Auto Manual Auto Manual Auto Manual Auto Manual Straight 0.2–5.0 — — (Center) (3/32) (1/128–13/64) 2.5–7.0...

  • Page 25: Thread Tension

    THREAD TENSION Correct upper thread tension The thread tension is normally set on “4” for gen- eral sewing applications. (Refer to the FABRIC/ THREAD/NEEDLE COMBINATION CHART on page 27.) However, the thread tension dial can be used to adjust the tension of the upper thread in the follow- ing cases.

  • Page 26: Tightening The Upper Thread Tension

    Tightening the upper thread tension Turn the thread tension dial to the right to tighten the upper thread tension. 1 Upper thread 2 Bobbin thread 3 Reverse side 4 If the upper thread tension is too weak, locks appear on the reverse side of the fabric.

  • Page 27: Presser Foot

    PRESSER FOOT Changing the presser foot 1. Press the “NEEDLE POSITION” button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3. Press the black button located at the back of the presser foot holder to release the foot.

  • Page 28: Feed Dogs

    FEED DOGS With the accessory compartment off the machine, the feed dog adjustment lever can be seen on the base of the sewing machine. Sliding the lever to the right will lower the feed dogs, for example during button sewing. If you wish to continue sewing normally, slide the lever to the left in order to raise the feed dogs.

  • Page 29: Needle

    NEEDLE Checking the needle Place the needle on a flat surface and check whether the space between the needle and the flat surface is parallel or not. If the space is not parallel then the needle is bent and should be thrown away to prevent damage to your project or to the machine.

  • Page 30: Fabric/Thread/Needle Combination Chart

    FABRIC/THREAD/NEEDLE COMBINATION CHART Today there are many different types of needles to suit a variety of sewing needs. Be sure to select the correct needle for a specific sewing project. For example, there are needles for denim material and others for sewing with metallic threads.

  • Page 31: Sewing

    1. SEWING CHAPTER 2 TRIAL SEWING Sewing using a utility stitch CAUTION – Be aware of the needle at all times while sewing, and keep your hands away from moving parts such needle, balance wheel thread take-up lever, otherwise an injury may result. –...
  • Page 32 4. Lower the presser foot. Press the “REVERSE STITCH” but- ton to sew a few reverse stitches, and then press the “START/ STOP” button. The machine will start sewing at a slow speed. Reverse stitches are sewn while the “REVERSE STITCH” button is pressed.

  • Page 33: Automatic Reinforcement Stitching

    AUTOMATIC REINFORCEMENT STITCHING Before beginning to sew, touch this key to sew reinforcement stitches (reverse stitches if the straight stitch was selected) automatically at the beginning of the stitch when the “START/STOP” button is pressed and at the end of the stitch when the “REVERSE STITCH” button is pressed. 1.

  • Page 34: Stitch Width And Length

    STITCH WIDTH AND LENGTH Adjusting the stitch width Making the stitch wider Press the “ ” stitch width key. Each press of the key increases the width of the stitch. Making the stitch narrower Press the “ ” stitch width key. Each press of the key decreases the width of the stitch.

  • Page 35: Useful Skills

    USEFUL SKILLS Sewing corners Stop the sewing machine with the needle in the fabric at the cor- ner, then raise the presser foot and turn the fabric. When sewing seams which are less than 5.0 mm (13/64" in width), baste the corner, then continue sewing while slowly changing the sewing direction and pulling the basting thread toward the rear of the machine.

  • Page 36: Sewing On Thick Fabric

    Sewing a curve with a zigzag stitch Set the stitch length short in order to obtain a fine stitch. Sew slowly while keeping the seam parallel to the fabric edge as you guide the fabric around the curve. For sharp corners, temporarily stop sewing with the needle in the material, then raise the presser foot and carefully turn the fabric while keeping it level with the presser foot.

  • Page 37: Using The Needle Plate

    Using the needle plate Align the edge of the fabric with a line on the needle plate to sew even seam allowances. 1 1.5 cm (19/32") Free-arm sewing Free-arm sewing is convenient for sewing tubular areas such as pant hems and cuffs.

  • Page 38: Utility Stitches

    2. UTILITY STITCHES STRAIGHT STITCHES 00: Straight stitch (center needle position) for normal sewing 01: Straight stitch (left needle position) for normal sewing 02: For reinforced sewing 03: For stretch fabric 1. Baste or pin the fabrics together. 2. Attach presser foot “J”, sew three or four reverse stitches at the beginning, then start sewing.

  • Page 39: Sewing Stretch Fabrics

    Sewing stretch fabrics Baste the fabric pieces together, then sew along the basting with- out pulling the fabric. Do not pull the fabric while sewing. 1 Basting Changing the stitch length Touch the “ ” or “ ” stitch length keys to adjust the stitch length.

  • Page 40: Zigzag Stitches

    ZIGZAG STITCHES 04: Zigzag stitch 05: Elastic zigzag stitch Overcasting (using a zigzag stitch) Sew the overcasting along the edge of the fabric so that the nee- dle drops over the edge of the fabric on the right side. 1 Needle drop point on the right side Applique (using a zigzag stitch) Attach the applique using adhesive or basting, then sew on the applique so that the needle drops over the edge of the applique...

  • Page 41: Overcasting Stitches

    OVERCASTING STITCHES 05: For stretch fabric 06: For thin and medium fabric 07: For thick fabric 08: For medium, thick and easily frayed fabric 09: For stretch fabric Sewing using stitch Sew the fabric with the fabric edge against the guide of presser foot “G”.

  • Page 42: Overcasting (When Using The Optional Side Cutter)

    OVERCASTING (WHEN USING THE OPTIONAL SIDE CUTTER) 00: Normal sewing 05: Zigzag stitch 06: Thin and medium fabrics 07: Thick fabric 08: Thick and medium stretch fabrics By using the side cutter, you can do overcasting while cutting the fabric. 1.
  • Page 43 6. Make a cut of about 2 cm (13/16") in the fabric. 1 2 cm (13/16") 7. Place the fabric as shown left figure B. –Right side of cut: on top of the guide plate –Left side of cut: underneath of the presser foot 1 Guide plate (lower knife) 2 Presser foot 8.

  • Page 44: Blind Hem Stitching

    BLIND HEM STITCHING 10: For other fabric 11: For stretch fabric 1. Fold the fabric and baste it as illustrated. 1 0.5 cm (13/64") 2 Surface 3 0.5 cm (13/64") 4 Reverse side 5 Basting 2. Attach presser foot “R”. Lower the presser foot so that its guide aligns with the edge of the folded hem.

  • Page 45: Adjusting The Needle Drop Point

    Adjusting the needle drop point Touch the “ ” and “ ” stitch width keys to adjust the needle drop point so that the needle slightly catches the fold of the hem. A– If the needle catches too much of the hem fold, touch the “...

  • Page 46: Buttonhole Stitching

    BUTTONHOLE STITCHING 12: For horizontal holes on blouses or shirts made from thin or medium fab- 13: For thin or medium fabric 14: For jeans or stretch fabric with a coarse weave 15: For stretch fabric 16: For suits or overcoats 17: For jeans or trousers 18: For thick coats Note...
  • Page 47 4. Lower the buttonhole lever and position it behind the metal bracket on the buttonhole foot. 1 Metal bracket on the buttonhole foot 5. While lightly holding the end of the upper thread, press the “START/STOP” button to start sewing. Gently feed the fabric by hand.

  • Page 48: Buttonhole Sewing Order

    Buttonhole sewing order 1 Reinforcement stitch Sewing stretch fabrics (“ ” and “ ”) When sewing buttonholes on stretch fabric, insert a gimp thread under the buttonhole stitch. 1. Attach presser foot “A” and hook the gimp thread onto the back of the presser foot.

  • Page 49: Buttons That Do Not Fit Into The Guide Plate (Odd-Shaped Buttons)

    3. Once sewing is completed, pull the gimp thread gently to re- move any slack, then trim off any excess. Buttons that do not fit into the guide plate (Odd-shaped buttons) Measure the button diameter + thickness to set the plate.

  • Page 50: Changing The Stitch Length

    Changing the stitch length Touch the “ ” or “ ” stitch length key to select the desired length. : Longer 2 Automatic stitch length setting: 0.4 mm (1/64") : Shorter If the fabric does not feed (for example, because the fabric is too thick), touch the “...

  • Page 51: Bar Tacking

    BAR TACKING For reinforcing the openings of pockets, etc. 1. Measure the area to be bar tacked and set the length using the scale on presser foot “A”. Pull on the end of the button holder plate to expand it. The finished size of the bar tack will be the space shown in the illustration.

  • Page 52: Thick Fabrics

    5. While lightly holding the upper thread, press the “START/ STOP” button. Before stopping, the machine will automatically sew a rein- forcement stitch after the bar tack is sewn. If the fabric does not feed (for example, because the fabric is too thick), touch the “...

  • Page 53: Changing The Bar Tack Stitch Length

    Changing the bar tack stitch length Touch the “ ” or “ ” stitch length key to select the desired length. : Longer 2 Automatic stitch length setting: 0.4 mm (1/64") : Shorter Changing the bar tack stitch width Touch the “ ”...

  • Page 54: Darning

    DARNING 19: For medium fabric 20: For thick fabric 1. Set the stitch length using the scale on presser foot “A”. Pull on the end of the button holder plate to expand it. The finished size of the bar tack will be the space shown in the illustration.

  • Page 55: Changing The Darning Stitch Length

    Changing the darning stitch length Touch the “ ” or “ ” stitch length key to select the desired length. : Longer (less dense) 2 Automatic stitch length setting: 2.0 mm (5/64") : Shorter (more dense) If the fabric does not feed (for example, because the fabric is too thick), touch the “...

  • Page 56: Darning Stitch Sewing Order

    Darning stitch sewing order 1 Reinforcement stitch...

  • Page 57: Eyelet Stitch

    EYELET STITCH For sewing eyelets on belts, etc. 1. Touch the “ ” or “ ” stitch length or stitch width key to select the eyelet size. 2. Attach presser foot “N”, check the needle drop point and lower the presser foot, then press the “START/STOP” button to start sewing.

  • Page 58: Button Sewing

    BUTTON SEWING For attaching buttons 1. Raise the presser foot lever and slide the feed dog adjust- ment lever to the right in order to lower the feed dog. 1 Feed dog adjustment lever (Slide off the accessory com- partment to expose the lever.) 2.

  • Page 59: Attaching Buttons With Four Holes

    Attaching buttons with four holes First, sew the two holes which are closest to you. Once they have been sewn, raise the presser foot, move the needle to the other two holes, and then sew them in the same way. Attaching a shank to the button 1.

  • Page 60: Zipper Insertion (Centered And Side Applications)

    ZIPPER INSERTION (CENTERED AND SIDE APPLICATIONS) For attaching zippers Centered application 1. Attach presser foot “J”, then place the right sides of the fabric together and sew straight stitches up to the area where the zipper will be attached. Then, baste at opening (the zipper area).

  • Page 61: Side Application

    Side application 1. Attach presser foot “J”, then place the right sides of the fabric together and sew straight stitches up to the area where the zipper will be attached. Then, baste at opening (the zipper area). 1 End of opening 2 Reverse stitch 3 Basting 4 Reverse side...
  • Page 62 4. Close the zipper and turn over the fabric. Then sew the other side of the zipper onto the fabric. 1 Reverse side 5. Turn over the fabric so that the right side faces up, sew straight stitches from the bottom to 5 cm (1-15/16) from the top, and then stop the machine.

  • Page 63: Dart Seam

    DART SEAM 1. Attach presser foot “J”, then sew a reverse stitch at the begin- ning of the dart and sew from the wide end to the narrow end without stretching the fabric. 1 Basting Before sewing, touch the automatic reinforcement stitching key to sew reinforcement stitches automatically at the begin- ning of the stitch.

  • Page 64: Gathering

    GATHERING For the waists of skirts, the sleeve openings of shirts, etc. 1. Select a stitch length of 4.0 mm (5/32") and a weak thread tension. 2. Attach presser foot “J”, then pull out about 5 cm (2") of both the bobbin and upper threads.

  • Page 65: Pulling Out The Bobbin Thread

    Pulling out the bobbin thread 1. Pass the thread along the groove in the direction of the arrow, and leave it there without cutting it. 1 Shuttle The bobbin cover should still be removed. 2. While holding the upper thread, press the “NEEDLE POSI- TION”...

  • Page 66: Pintuck

    PINTUCK For decorating blouses, etc. 1. Mark along the folds on the reverse side of the fabric with a spatula. 1 Reverse side 2. Fold the fabric so that the surface faces upward and iron only the folded parts. 1 Right side of fabric 3.

  • Page 67: Flat Fell Seam

    FLAT FELL SEAM For reinforcing seams and neatly finishing edges 1. Attach presser foot “J”. Sew the seam line, then cut half of the seam allowance from the side that the flat fell seam will lie against. 1 About 1.2 cm (1/2") 2 Reverse side Before sewing, touch the automatic reinforcement stitching key to sew reinforcement stitches automatically at the begin-...

  • Page 68: Finished Flat Fell Seam

    Finished flat fell seam 1 Right side of fabric...

  • Page 69: Appliques

    APPLIQUES 1. Attach the applique to the fabric with fabric glue or basting so that it will not move during sewing. 1 Applique 2 Fabric glue 2. Attach presser foot “J”. Make sure that the needle drops just outside the applique, then start sewing. 1 Applique Before sewing, touch the automatic reinforcement stitching key to sew reinforcement stitches automatically at the begin-...

  • Page 70: Scallop Stitch

    SCALLOP STITCH For decorating the collars of blouses, the edges of tablecloths, etc. 1. Attach presser foot “N”, then sew the edge of the fabric so that the stitches are not right on the edge of the fabric. 1 Right side of fabric Before sewing, touch the automatic reinforcement stitching key to sew reinforcement stitches automatically at the begin- ning and at the end of the stitch.

  • Page 71: Smocking Stitch

    SMOCKING STITCH For making decorative stitching 1. Select “ ”, set the stitch length to 4.0 mm (5/32") and select a weak thread tension. Then, sew columns of straight stitches at intervals of 1 cm (25/64"). 1 About 1 cm (25/64") 2.

  • Page 72: Patchwork Stitch

    PATCHWORK STITCH 1. Match the fabric pieces with their surface sides facing each other and sew the pieces together with a straight stitch. Open the seam allowance [about 1 cm (25/64")] and press it flat. 1 Straight stitch 2 Seam allowance 3 1 cm (25/64") 4 Reverse side 2.

  • Page 73: Fagoting

    FAGOTING For fagoting, decorating, etc. 1. Separate the folded edges of the fabric pieces with a gap of 0.4 cm (5/32") and baste them onto a piece of thin paper or water-soluble stabilizer sheet. 1 Basting 2 0.4 cm (5/32") 3 Thin paper or stabilizer sheet 2.

  • Page 74: Decorative Stitching

    DECORATIVE STITCHING Other decorative stitches: 56 – 63 Decorative stitching These stitches are used as decorative hem stitches or to deco- rate the seams of crazy quilts. Use a contrasting thread color or decorative embroidery thread. Shell tacking 1. In decorative stitch mode, enter “61” to select the stitch for shell tacking.

  • Page 75: Hem-Stitch (Heirloom Stitch)

    HEM-STITCH (HEIRLOOM STITCH) Decorative stitches: 46 – 50 For sewing tablecloths, decorative hems on clothes and deco- rative stitching on shirtfronts. A more attractive finish can be obtained if you use the “130/705H Wing” needle when sewing these patterns. If using a wing needle and the stitch width has been set to manual, check that the needle will not touch the presser foot before start- ing sewing.

  • Page 76: Hem-Stitching 2

    5. Illustration of finished product. Hem-stitching 2 1. In decorative stitch mode, enter “48” to select the stitch for hem-stitching. 2. Pull out several threads from both sides of the 4 mm (5/32") part which is not yet frayed. [Pull out four threads, leave five threads and then pull out four threads, the width of five threads is approximately 4mm (5/32") or less.] 1 Approx.

  • Page 77: Twin Needle

    TWIN NEEDLE Decorative stitches where the zigzag width can be changed manually. When using twin needles, use the “J” presser foot regardless of what kind of sewing will be carried out. 1. Insert twin-needle. 1 Stopper 2. Follow the instructions for single-needle threading using the horizontal spool pin.
  • Page 78 4. Set the extra spool pin into the hole on the end of the bobbin winder shaft on the top of the machine. Follow the instructions for single-needle threading. 1 Extra spool pin for right needle threading. 2 Push the spool pin securely into place. 5.

  • Page 79: Fonts And Decorative Stitches

    3. FONTS AND DECORATIVE STITCHES FONT STITCHES 1. Touch “ ” until the cursor (“ ”) moves over the type of font that you want to sew. Block font Italic font Outline font 2. Use the stitch selection keys to enter the number of the de- sired character.

  • Page 80: Combining Characters

    Combining characters Example: To combine outline letters to create “ ” 1. Touch “ ” until “ ” moves over “ ”. 2. Touch “ ”, then “ ”, the stitch number for the letter “ ”. 3. Touch “ ) ”.

  • Page 81: Decorative Stitches

    DECORATIVE STITCHES 1. Touch “ ” until the cursor (“ ”) moves over “ ”. 2. Use the stitch selection keys to enter the number of the de- sired decorative stitch. The selected decorative stitch appears on the screen. A two-digit number must be entered when selecting the deco- rative stitch.

  • Page 82: Selecting A Decorative Stitch

    Selecting a decorative stitch Example: To select the decorative stitch “ ” 1. Touch “ ” until “ ” moves over “ ”. 2. Touch “ ”, then “ ”, the stitch number for the stitch “ ”. Combining decorative stitches Example: To combine decorative stitches to create “...

  • Page 83: Correcting A Pattern Combination

    CORRECTING A PATTERN COMBINATION Example: To change “ ” to “ ” 1. Touch “ ) ”. clear (Touch “ ) ” the same number of times clear info cfm clear as the number of characters that you wish to change.) memory enter...

  • Page 84: Changing The Size

    CHANGING THE SIZE Touch the “ ” or “ ” stitch width key to adjust the zigzag stitch width or the “ ” or “ ” stitch length key to adjust the stitch length. However, when italic font is set, the size cannot be changed.

  • Page 85: Checking A Pattern Combination

    CHECKING A PATTERN COMBINATION Example: To check the pattern combination “ ABCDEFGHIJKLMN ” Touch the “ ) ” key to scroll the pattern com- bination across the display from the beginning. "ABCDEFGHIJKLMN" is displayed.

  • Page 86: Memory

    MEMORY Up to 70 pattern combinations can be stored in the memory under the five stitch numbers 95, 96, 97, 98 and Saving a pattern combination Example: To select the decorative stitch “ ” 1. Combine characters to create the word “...

  • Page 87: Recalling A Stored Pattern Combination

    Recalling a stored pattern combination Example: To recall the pattern combination “ ”, stored under stitch number 96 1. Use the stitch selection keys to enter the number of the desired pattern combination. 2. Press the “START/STOP” button.

  • Page 88: Sewing

    SEWING Sewing attractive finishes Refer to the table below and the “FABRIC/THREAD/NEEDLE COMBINATION CHART” for recommended fabrics, threads and needles to use in order to obtain attractive sewing finishes. Furthermore, pattern slippages may occur when using different fabric thicknesses or types of stabilizers. Be sure to carry out a test sewing beforehand to check.

  • Page 89: Sewing

    Sewing 1. Attach presser foot “N”. 2. Place the fabric under the presser foot, pull the upper thread out to the side and then lower the presser foot. Be sure that the material is positioned so that pattern will be sewn facing the correct direction.

  • Page 90: Adjusting Stitch Patterns

    ADJUSTING STITCH PATTERNS A stitch pattern may get deformed due to the thread or cloth. It is a good idea to first make a trial stitching, and then make adjustments for each stitch pattern if necessary. 1. In decorative stitch mode, use the stitch selec- tion keys to enter the number 94.

  • Page 91: Maintenance

    MAINTENANCE CLEANING Cleaning the screen CAUTION Disconnect the power cord from the wall socket before cleaning the screen, otherwise injury or electrical shock may result. If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents. Cleaning the sewing machine surface CAUTION Disconnect the power cord from the wall socket before cleaning the sewing machine surface,...
  • Page 92 4. Take out the shuttle. 5. Remove accumulated lint and thread from the inner shuttle and race with a brush or a vacuum cleaner. 1 Race 2 Shuttle 6. Set the shuttle by aligning the shuttle projection with spring of the stopper. 1 Projection 2 Spring Lint and dust accumulated in the race will some-...

  • Page 93: Changing The Light Bulb

    CHANGING THE LIGHT BULB When replacing the light bulb 1. Turn the power off. The power cord plug must be removed from the electric outlet prior to changing the bulb. 2. Loosen the screw on the reverse side of sewing head. 3.

  • Page 94: Error Messages

    ERROR MESSAGES If the machine is not properly setup when the “START/STOP” or “REVERSE STITCH” button is pushed, or a correction of your operating procedure is necessary, the machine will not start and will instruct you with an alarm and warning message on the LCD. Warning messages This message is displayed when the motor is locked, such as when the thread becomes entan-...

  • Page 95: Messages

    This message is displayed when a buttonhole pat- tern is selected and the “START/STOP” or “RE- VERSE STITCH” button is pushed while the but- tonhole lever is raised. In this case, the machine can only rotate once. This message appears when the “START/STOP” or “REVERSE STITCH”...

  • Page 96: Trouble With Threads And Stitches

    Trouble with threads and stitches Before calling for service, check the following items. If the problem still persists, contact the place of purchase or your nearest authorized Brother dealer. Probable cause Remedy Symptom 1. Upper threading is not correct. 1. Re-thread upper thread. 1.

  • Page 97: Mechanical Trouble

    Mechanical trouble Probable cause Remedy Symptom 1. Feed dog is lowered. 1. Raise the feed dog with the feed dog 1. Fabric is not fed properly adjustment lever. 2. Stitch length is set at no feeding. 2. Set stitch length properly. 3.

  • Page 98: Sewing Chart

    SEWING CHART Darning of medium – fabric General sewing, DARNING gathering, pintuck, STRAIGHT STITCH etc. Darning of thick fabric Reinforcement at TRIPLE General sewing for BAR TACK opening of pocket, STITCH reinforcement etc. Straight stitching (attaching For making eyelet on STRETCH sleeves, reinforcing, EYELET...
  • Page 99 ALPHABET Character sewing DECORATIVE STITCH CHARACTERS SATIN STITCH Decorative stitching CROSS STITCH – – The machine sews in reverse while the “REVERSE STITCH” button is pushed. The machine sews three reinforcement stitches and stops when the “REVERSE STITCH” button is pushed.

  • Page 100: How To Use Walking Foot (Optional Accessory)

    HOW TO USE WALKING FOOT (OPTIONAL ACCESSORY) This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to be fed when sewing but this foot can prevent such materials from crumpling, slipping or stickking between presser foot and materials thanks to even feeding upper and lower materials.

  • Page 101: Patterns (Programmed In Machine)

    PATTERNS (PROGRAMMED IN MACHINE) Utility stitches Character sewing Alphabet (Block style) Alphabet (Italic style)

  • Page 102: Decorative Stitches

    Alphabet (Outline style) Decorative stitches Satin stitches Cross stitches Size cannot be changed. Hairloom...
  • Page 103 Decorative stitch...
  • Page 104 ENGLISH 882-955 194955-011 Printed in Taiwan...

Table of Contents