Configure The Iscsi Initiator And Targets; Discovered Targets Tab - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

1. Modify the initiator name:
# vi /etc/<initiatorname>.iscsi
2. To configure the initiator and targets, start the iSCSI initiator applet (located in the YaST Control
Center under Network Services), and then set the initiator to start at boot time
Figure 44 Configure the iSCSI initiator and targets
.
3. Select the Discovered Targets tab and enter the iSCSI target IP address
Figure 45 Discovered Targets tab
.
(Figure
(Figure 45).
MPX200 Multifunction Router
44).
67