Picture; Sound; Preference (Languages, Parental Control - Philips DVP2880/F7 User Manual

minutes of inactivity (for example, in
pause or stop mode).

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV System]: Select a TV system that
•
matches your TV. By default, this setting
matches the common TVs in your
country.
[Aspect ratio]: Select a picture display
•
format to fit the TV screen.
[Picture Setting]: Select a predefined
•
color setting, or customize a setting.
• [Closed Caption]: Enable this feature
to show the sound effects in subtitles.
Applicable only when both a disc and a
TV support this feature.
[HD JPEG]: Enable this feature to view
•
high-definition pictures through HDMI
connection.
• [HDMI Setup]:Set up for HDMI
connection.
[Resolution]: Select a resolution
•
for high definition videos.
[HDMI Deep Color]: Create
•
vivid images with more color
details when the video content is
recorded in Deep Color and the
TV supports this feature.
[Wide Screen]: Select a display
•
format for wide screen videos.
[EasyLink Setup]: See "Use your
•
DVD player" > "Use Philips
EasyLink" for details.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
[Analogue Output]: Select an audio
•
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
• [Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output]: Select a type
•
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats; [PCM
Only] - Downmix to two-channel
audio signal.
[LPCM Output]: Select a LPCM
•
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output] is
enabled only when [PCM Only] is
selected under [Digital Output].
[HDMI Audio]: Enable or disable
•
the audio output through HDMI
connection.
• [Audio Sync]: Set a delay time for
audio output to match the video play.
[Volume]: Change a volume level.
•
[Sound Mode]: Select a preset sound
•
effect.
[Night Mode]: Select quiet or full
•
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1
Press .
EN
11