Software Upgrade; Using Tv Functions - Samsung Crystal Surround Air Track HW-F450 User Manual

POWER
TV POWER
POWER
TV POWER
AUTO
POWER SPEAKER TV SOURCE
SOURCE
SoundShare
REPEAT
AUTO
SOURCE POWER SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH DIMMER
SoundShare
SOUND EFFECT SMART VOLUME
VOL
REPEAT
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
TV VOL TV CH AUDIO SYNC
AH59-02547B
TV MUTE TV INFO TV PRE-CH DIMMER
SOUND EFFECT SMART VOLUME
VOL
S/W
MUTE
LEVEL
VOL
3D SOUND
PLUS
AH59-02547B
POWER
TV POWER
POWER TV POWER
AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
AUTO
REPEAT
SOURCE POWER SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH DIMMER
SoundShare
SOUND EFFECT SMART VOLUME
REPEAT
VOL
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND
DRC
PLUS
TV VOL TV CH AUDIO SYNC
AH59-02547B
TV MUTE TV INFO TV PRE-CH DIMMER
SOUND EFFECT SMART VOLUME
VOL
S/W
MUTE
LEVEL
VOL
3D SOUND
PLUS
AH59-02547B

sOftWare UPgraDe

Samsung may offer upgrades for the Crystal
Surround Air Track's system firmware in the future.
If an upgrade is offered, you can upgrade the
firmware by connecting a USB drive with the
firmware upgrade stored on it to the USB port on
your Air Track.
Note that if there are multiple upgrade files, you must
load them onto the USB drive singly and use them to
upgrade the firmware one at a time.
Please visit Samsung.com or contact the Samsung
call center to receive more information about
downloading upgrades files.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
▪
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn
off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
Once upgrading the product software is completed, turn off the product and then press and hold (@) button for a while
to reset the product.
▪
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
▪
Depending on the manufacturer, some USB devices may not be supported.
Using the Anynet+(HDMI-CeC) function
Anynet+ is a function that enables you to control other Samsung Devices
with your Samsung TV's remote control.
The Anynet+ function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with an the HDMI cable.
(See page 12)
2. Set the Anynet+ function on your TV and the SAT to ON. (See the
TV instruction manual for more information.)
▪
Depending on your TV, certain HDMI output resolutions may not
work.
S/W
LEVEL
▪
Please refer to the user's manual of your TV and check for the
DRC
Anynet+ function.)
Using the tV functions (with Samsung tVs only)
• Press tV SOURCe on the remote control to change the TV's input source.
• Press tV INFO on the remote control to display the TV channel
information.
• Press tV CH on the remote control to select the TV channel.
• Press tV VOL on the remote control to increase or decrease the volume
level.
• Use tV Pre-cH button to move to the previous TV channel in TV mode.
▪
When you press the soundshare button, the TV's sound is
transmitted through the Air Track system via a Bluetooth
connection. The Air Track also controls the sound volume,
S/W
LEVEL
sound quality, etc.
▪
The remote control can operate TVs made by SAMSUNG only.
DRC
logo (If your TV has an logo, then it supports the
21