Sony HDR-CX220 "Handycam User Manual page 42

You can change the on-screen displays to show messages in a specified language.
Select [Setup]
To turn off the power
Close the LCD screen or press the POWER button (models with the POWER button).
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder (
Notes
The recording date and time are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To
display them, select
[Date/Time].
Related topics
Information on your camcorder model:
[Power On By LCD (HDR-CX320/ CX320E/ CX380/ CX380E/ CX390E/ PJ320E/ PJ380/ PJ380E/
PJ390E)]
To set the date and time again:
To calibrate the touch panel:
PJ380/ PJ380E/ PJ390E)]
Copyright 2013 Sony Corporation
[ General Settings] [Language Setting]
[Setup] [ Playback Settings]
Model Information
[Date & Time Setting]
[Calibration (HDR-CX320/ CX320E/ CX380/ CX380E/ CX390E/ PJ320E/
42
a desired language.
), and then adjust the angle (
[Data Code]
).
Back to top