Programming Options - AEG LAVATHERM T56830 User Information

Programming options

Permanently programme
in the audible
signal which reminds
you that the programme
is complete.
Adjust 'level of dryness'
detection:
If the laundry is slightly
drier or slightly damper
at the end of the
programme than with
the standard setting.
To deactivate the EMPTY
WATER display when
using an external drain
for the condensed water.
24
Objective
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL button and hold down for
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
3. Press the START/PAUSE button until the setting required
4. Turn the programme selector to OFF.
1. Turn the programme selector to any programme.
2. Press the DELAY TIMER and SPECIAL CARE buttons at the
Settings may be cancelled as under 1 and 2, but the EMPTY
WATER display is briefly illuminated (instead of flashing).
Implementation
approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
same time and hold down for approx. 5 seconds. The cur-
rent setting is displayed on the programme progress dis-
play:
– END display: Setting for drier laundry
– COOLING display: Standard setting
– DRYING display: Setting for damper laundry
appears on the programme progress display.
The setting is permanently programmed.
same time and hold down for approx. 5 seconds. The EMPTY
WATER display flashes briefly.
The EMPTY WATER display is permanently deactivated.