Door Reversal Instructions - AEG LAVATHERM 57810 User Information

Door reversal instructions

1
Warning! The door may only be reversed by a specialist.
If necessary, please contact your local Service Force Centre.
Warning! Before reversing the door, disconnect the mains plug; with a
permanent connection: remove the fuse.
1. Open door.
2. Unscrew hinge A from the front of
the machine and take off the load-
ing door.
3. Carefully pry off cover plates B and
C. To do this, insert a thin screw-
driver into the slots as shown in the
illustration, press downwards
slightly and pry out the cover plates.
4. Unfasten locking block D from the
snap-on fixture, take out and rein-
sert on the other side having rotat-
ed the block through 180°.
5. Unscrew hinge A from the loading
door, rotate through 180°, reinsert
on the opposite side and screw
down.
6. Reinsert cover plates B and C on the opposite site having first rotated
them through 180°.
7. Unscrew cover plates E from the
front of the machine, rotate
through 180°, screw on the
opposite side.
8. Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Disconnect cable connector from
door lock F.
10. Press snap-in button G in and
down, press cover down slightly
and remove from front of the ma-
chine.
11. Disconnect cable connector from
cover G.
28