Removing Laundry Or Loading Laundry When Necessary; End Of The Drying Process; Removing The Laundry; Cleaning The Door Seal - AEG LAVATHERM 37320 electronic Operating Instructions Manual

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
0 Open the door.
1
Caution! The laundry and the drum may be
hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START button to resume the drying
process.

End of the drying process

The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase.
After the cooling phase the END / CREASE GUARD display is illumi-
nated. You can now remove the washing from the tumble dryer.
The crease guard phase follows automatically after the drying process.
The drum rotates intermittently. This keeps your laundry loose and
crease-free.
If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is
sounded intermittently during this phase.
You should remove the washing at the latest towards the end of the
anti-crease phase to avoid creasing.

Removing the laundry

0 Open the door and remove the laundry.

Cleaning the door seal

0 Rub the door seal with a damp cloth.
Drying
17