Wireless > Wireless Network Site Survey; Wireless Network Site Survey - Cisco Linksys WUMC710 User Manual

Linksys WUMC710
Wireless > Wireless Network Site Survey
Click the Wireless Network Site Survey tab to begin a site survey The Wireless
Network Site Survey screen lists the wireless networks detected by the media
connector

Wireless Network Site Survey

Number of Wireless Networks
The number of wireless networks detected by
the media connector is displayed
Select To connect to a wireless network, click Select Then click Connect
Wireless Network Name
The network name or SSID of the wireless network
is displayed
Signal The percentage of signal strength is displayed 100% is the strongest
signal strength possible; 0% is the weakest possible
Security If the network supports Wi-Fi Protected Setup, the Wi-Fi Protected
Setup icon is displayed The security method used by the wireless network
is displayed
Click Refresh to update the on-screen information
After you have selected a network, click Connect A new screen appears Follow
the instructions for the security method of your network
WPA
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode WPA Personal is automatically displayed
Passphrase Enter the key shared by the media connector and wireless router
or access point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
WPA2
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WPA2 Personal is automatically displayed
Passphrase
Enter the key shared by the media connector and wireless router
or access point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
Advanced Configuration
10