Audio Connections - Behringer U-PHONO UFO202 User Manual

12 U-PHONO UFO202 User Manual
• Flip the tape or record over and repeat the
recording process
• Once both sides are recorded, you may edit the file to cut
out any extra time before or after the audio was captured.
You may also cut the long track into individual songs
and save the files separately. This process differs slightly
depending on what program you are using, so refer to the
software manual for editing procedures
• You can play back your stereo recorded audio through the
UFO202 RCA outputs and PHONES output. You may want
to apply equalization or other processing if your software
application is so equipped
• If you plan to burn these files to a CD for use in a home
stereo or car, save the audio in WAV format

7. Audio Connections

Although there are various ways to integrate the UFO202 into
your studio or live set-up, the audio connections to be made
will basically be the same in all cases:
7.1 Wiring
Please use standard RCA cables to connect the UFO202
to other equipment:
tip
sleeve
shield
You can also use a 1/4" adapter cable:
sleeve
tip
tip
sleeve
sleeve
tip