Behringer V-AMP3 User Manual page 7

7
V-AMP3 User Manual
(15) REVERB: Adjusts the amount of reverb for the current preset.
Rear/Side panel
(16) INPUT: Plug a guitar into this jack using a ¼" instrument cable.
(17) PHONES: Plug a pair of headphones into this jack using a ¼" TRS cable.
(18) AUX IN: Plug an external sound source into this jack using a ¼" TS or
TRS cable.
(19) AUX LEVEL: Adjusts the input level of the AUX IN jack.
(20) LINE OUT: Plug balanced or unbalanced ¼" cables into these jacks to send
the stereo signal for recording or performance applications.
(21) AC IN: Plug the included power cable into this socket. When connected to
the mains, the V-AMP 3 switches on automatically.