San Switch 2/32 Firmware Version 4.0.2B Updates - HP StorageWorks 2/32 - SAN Switch Release Note

Version 4.0.2b
Hide thumbs Also See for StorageWorks 2/32 - SAN Switch:
Table of Contents

Advertisement

Documentation Updates
The hp StorageWorks SAN Switch 2/32 Version 4.0.x Installation Guide supplied with
your switch lists the HP System/e Rail Kit as an option. This is not always true.
When ordering the SAN Switch 2/32, you may receive an HP System/e Rail Kit in
addition to standard components with your order. Use the HP System/e components
for mounting your switch in an HP System/e Rack, following the instructions
provided in the SAN Switch 2/32 Installation Guide.
NOTE: The hardware that makes up the HP System/e Rail Kit are non-saleable components.
You can identify this hardware per the following HP part numbers:
A7340-87901 (Rail, qty 2)
A7340-87902 (hardware, qty 1)

SAN Switch 2/32 Firmware Version 4.0.2b Updates

The following lists enhancements to Fabric OS Version 4.0.2b:
IMPORTANT: Fabric OS Version 4.0.2b firmware works with the hp StorageWorks SAN Switch
2/32 and the hp StorageWorks SAN Core Switch 2/64. This firmware will not work if loaded onto
the hp StorageWorks SAN Switch 1 Gb models, or the hp StorageWorks SAN Switch 2/8 EL,
2/16 or 2/16 EL models.
Firmware Download Functionality
This section summarizes changes to the firmware download functionality. For more
detailed information refer to the hp StorageWorks Fabric OS Version 3.0.x/4.0.x
Reference Guide.
firmwaredownload
Use this admin level command to download new firmware version to a switch.
firmwarecommit
Use this admin level command to commit a new firmware version to both partitions of
flash memory. The SAN Switch 2/32 maintains a primary and secondary partition for
firmware. The firmwaredownload command writes to the secondary partition
only and automatically commits the firmware at the end of the download process,
following a switch reboot.
If you wish to override the auto-commit setting, you must use the "-sn" option on the
switch. See the help page for more details. HP recommends maintaining the same
firmware version on each partition of a switch or CP card.
SAN switch 2/32, version 4.0.2b release notes
Documentation Updates
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks san switch 2/32

Table of Contents