Installation Instructions - HP P9000 Release Note

Supported operating system
Tru64 UNIX 5.0 or later
DYNIX/ptx 4.4 or later
Red Hat Linux AS/ES 3.0 Update 2 or later
(with the ia32el package and Compatibility Layer disk
installed)
Red Hat Linux AS/ES 4.0, 5.0, or later
(with the ia32el package and Compatibility Layer disk
installed if on IA64)
MPE/iX C.16.01 or later
(with patch MPEKXU3 installed for using the SCSI pass-thru
driver)
IRIX 6.5 or later
OpenVMS 7.3- 1 or later
(with C Run Time Library (RTL) installed)
OpenVMS 8.3 or later
SuSE Linux Enterprise Server 8 or 9 or later on Microsoft
Windows XP
VMware ESX Server 2.5.1 or later
Enhancements
Added description of -logint and -logtst options.
Added HORCC_AUTH_UID environment variable.
Added description of rendev command for AIX 7.1.
Supported FCoE interface for supporting BC/SS/CMDDEV on Windows.
Added resource group control.
Fixes
Changed description about authentication mode for VSS.
Changed condition that removes AUTH file.
Prerequisites
If you use the following software, install the RAID Manager/LIB that is under the ../RL directory on
the CD.
BMC Enterprise Snapshot software
Remote performance monitor provided by HP
HP Omniback software
RAID management software provided by HP or other vendor

Installation instructions

See the following user guide for installation instructions:
HP StorageWorks P9000 RAID Manager User Guide
4 Enhancements
Supported hardware
AlphaServer models
Symmetry 5000 series
Itanium or compatible processors
EM64T, Itanium, or compatible processors
HP 3000 series
Origin 2000 series
AlphaServer models
Integrity servers
zSeries or S/390 processors
Pentium or compatible processors