[Prov] Set Commanddevsec; [Prov] Set Devgrpdef - HP StorageWorks P9000 Reference Manual

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set CommandDev,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDev}
=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed information
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs

[PROV] Set CommandDevSec

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}
=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed information
Item
LDKC:CU:LDEV
CommandDevSec
Num. of LDEVs

[PROV] Set DevGrpDef

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
138 Audit log examples
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device security setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.