Addition Of The Target; Editing The Target; Deletion Of The Target - Sanyo PLC-XU300 - XGA LCD Projector Owner's Manual

Addition of the target

1
Select Target Addition from Target menu. The target
information registering window appears.
Items Description
Name ......................... Enter a management name of the target
equipment.
IP address ............... Enter IP address of the target equipment.
Community ........... Enter a community name in the network.
Default name is "public".
System information ..... Displays information set on the network
equipment
2
Enter target setup information and click Update button.
The information set on the target equipment are dis-
played on the system information items.
0 When the target equipment is not operating, or it is not the
monitoring equipment, the error dialog "Cannot obtain infor-
mation" will appear.
3
Click OK to close the window. Repeat the above steps to register for other equipment
which is to be managed.

Editing the target

1
Select a target name to edit on the status list with right click.
2
Select Target editing on the popup menu. The target information window will appear
and edit the contents, then click OK button.
0 The system information cannot be edited.
0 Target editing can be executed by selecting Target editing from Target menu.

Deletion of the target

1
Select a target name to delete on the status list with right click.
2
Select Target deletion on the popup menu. The confirmation dialog will appear and
click Yes button to execute deleting.
0 Target deletion can be executed by selecting Target deletion from Target menu.
0 It cannot perform the target addition, editing and deletion during the target monitoring.
0 Up to 200 targets can be registered.
0 Up to 255 characters can be used for target name and community.
Addition of the target
PJ NETWORK MANAGER
OWNER'S MANUAL
11