Mfgpage Command; Constchk Command; Activate Command - LSI X79 Extreme11 User Manual

|
Appendix A: Commands
A.3.8 MFGPAGE Command
Command Line
Program Return Value
A.3.9 CONSTCHK Command
Command Line
Program Return Value
A.3.10 ACTIVATE Command
Command Line
Program Return Value
Page 40
The MFGPAGE command updates information on manufacturing pages. Only DOS and
EFI support this command.
sas2ircu
<offset> <value>
<controller_#> – The index of the controller with the manufacturing pages

Parameters
you want to update.
<passcode> – The passcode required for DOS access.

<mfgpage_#> – The manufacturing page (4 or 10) that requires an update.

<offset> – The DWord offset of the specified manufacturing page that requires

an update, in hexadecimal format.
<value> – The value for the offset to be modified, in hexadecimal format.

0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
The CONSTCHK command sends requests to the Integrated RAID firmware to start a
consistency check operation on the specified volume.
sas2ircu <controller_#> constchk <volumeId> [noprompt]
<controller_#> – The index of the controller on which the consistency check

Parameters
operation will run.
<volumeId> – The volume ID of an Integrated RAID volume, as listed in the

DISPLAY command, on which the consistency check operation will run.
noprompt – This optional parameter prevents warnings and prompts from

appearing while the command is running.
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
The ACTIVATE command activates an inactive Integrated RAID volume.
sas2ircu
<controller_#> – The index of the controller with the volume that requires

Parameters
activation.
<volumeId> – The volume ID of an Integrated RAID volume currently in the

Inactive state.
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
<controller_#> mfgpage <passcode> <mfgpage_#>
<controller_#> activate <volumeId>
SAS2 Integrated RAID Solution User Guide
|
LSI Corporation Confidential August 2010