Table of Contents
Advertisement
When Problems Occur
Before treating the problem as a machine breakdown, refer to the
following table and check the printer condition again.
•
Never open or remove machine covers that are secured with screws
unless specifically instructed in the user guide. A high voltage
component can cause electric shock.
•
Do not try to alter the machine configuration, or modify any parts.
An unauthorized modification can cause smoke or fire.
NOTE
>
Information on incorrect print processing will be stored in
the [Error Log]. When no print processing is carried out,
print the [Error Log] and check the print status. Print data
that cannot be correctly processed may be discarded.
Refer to "Information Menu" on page 52 on how to print
the [Error Log].
>
Limitations of the printer and incorrect settings at the
printer, computer and server corresponding to your
network environment may also result in printing
problems.
Symptom
No power.
WARNING
Reason/Action
Is the power of the printer switched off? Push the power
switch to the <|> position to switch on the power.
" Switching On and Off the Power" (P. 14)
Is the power cord disconnected or not securely connected?
Switch off the power of the printer and connect the power
cord to the power outlet again. Then, switch on the power to
the printer.
Setup and Quick Reference Guide Connecting the Power Cord
to Switch On the Printer
Is the power cord connected to a power outlet with the correct
voltage? Connect the printer exclusively to a power outlet
with a suitable voltage and current rating.
Setup and Quick Reference Guide Safety Notes
MPS6500b User's Guide> 94
Advertisement
Table of Contents
