ASROCK P4i45D User Manual page 6

BIOS:
OS:
1. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
*Please refer to the NOTE on page 7 for the details.
2. About the setting of "Hyper Threading Technology", please check page 22
of "User Manual" in the Support CD.
3. While CPU overheat is detected, the system will automatically shutdown
Vcore. Please check if the CPU fan on the motherboard functions properly
before you resume the system. To improve heat dissipation, remember to
spray thermal grease between the CPU and the heatsink when you install
the PC system.
4. Do NOT use a 3.3V AGP card on P4i45D+'s AGP slot!
It may cause permanent damage!
5. Power Management for USB 2.0 works fine under Microsoft
SP1 / 2000 SP4. It may not work properly under Microsoft
ME. Please refer to Microsoft
http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
6. Although P4i45D+ offers stepless control, it is not recommended to
perform over clocking. When the CPU frequency of P4i45D+ is set to
perform over clocking, it's Memory clock will also be overclocked
proportionally. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU
and the motherboard.
AMI legal BIOS; Supports "Plug and Play";
ACPI 1.1 compliance wake up events;
Supports jumperfree; SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 6)
®
Microsoft Windows
Memory Support Frequency
800
533
400
®
®
98 SE / ME / 2000 / XP compliant
DDR400*
DDR266
DDR266
official document at
® Windows ® XP
® ®
Windows 98/