Security; Change Supervisor Password - Asus P5VD2-MX SE User Manual

Hit 'DEL' Message Display [Enabled]
When set to [Enabled], the system displays the message "Press DEL to run Setup"
during POST. Configuration options: [Enabled] [Disabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]

2.6.3 Security

The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password :Not Installed
User Password

Change Supervisor Password

Change User Password
v02.54 (C)Copyright 1985-2003, American Megatrends, Inc.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you
have set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your
password. The Supervisor Password item now shows "Installed". To change the
supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then
press Enter. The message "Password Uninstalled" appears.
To clear the supervisor password, select the Change Supervisor Password then
press Enter. The message "Password Uninstalled" appears.
2-28
:Not Installed
<Enter> to change
password.
<Enter> again to
disable password.
←→ Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 2: BIOS Information