Asus P5P43TD PRO User Manual page 50

3rd Information: 27-7-1-10-10
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks] [4
DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks] [7 DRAM Clocks] [8 DRAM Clocks]
[9 DRAM Clocks] [10 DRAM Clocks] [11 DRAM Clocks] [12 DRAM Clocks] [13 DRAM
Clocks] [14 DRAM Clocks] [15 DRAM Clocks]
PRE to PRE Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
Configuration options: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks] [4
DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks] [7 DRAM Clocks] [8 DRAM Clocks]
[9 DRAM Clocks] [10 DRAM Clocks] [11 DRAM Clocks] [12 DRAM Clocks] [13 DRAM
Clocks] [14 DRAM Clocks] [15 DRAM Clocks]
DRAM Static Read Control [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Dynamic Write Control [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Read Training [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Write Training [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
MEM. OC Charger [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
Ai Clock Twister [Auto]
Allows you to set the DRAM performance. Configuration options: [Auto] [Lighter] [Light]
[Moderatet] [Strong] [Stronger]
Ai Transaction Booster [Auto]
Allows you to set the system performance. Configuration options: [Auto] [Manual]
The following items appear only when you set the Ai Transaction Booster item to [Auto]
C/P : A1 A2
LVL : 08 08
Common Performance Level [05]
Set this item to a higher level for better compatiility or a lower level for better
performance. Use the <+> and <-> keys to adjust the value.
Pull-In of CHA/CHB PH1/2 [Disabled]
Set this item to [Enabled] to apply enhancement on DRAM Channel A and B, Phase
1 and 2. The number of phases is determined by DRAM frequency and FSB strap.
Configuration options: [Disabled] [Enabled]
2-12 Chapter 2: BIOS information