Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
USB 2.0 Connector
(9-pin USB67)
(see p.7 item 21)
Shared USB 2.0 Connector
(9-pin USB45)
(see p.7 item 32)
Infrared Module Connector
(5-pin IR1)
(see p.7 item 20)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.7 item 31)
(AUX1: see p.7 item 30)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.7 item 29)
connect to the
power supply
power connector
USB_PWR
P-7
P+7
GND
DUMMY
1
GND
P+6
P-6
USB_PWR
1
USB_PWR
USB_PWR
P-4
P-5
P+4
P+5
GND
GND
DUMMY
IRTX
+5V
DUMMY
1
GND
IRRX
CD-L
GND
GND
CD-R
AUX-L
GND
GND
AUX-R
GND
+5VA
BACKOUT-R
BACKOUT-L
1
GND
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
6 default USB 2.0 ports on the
rear panel. If the rear USB ports
are not sufficient, this USB 2.0
connector (USB67) is available
to support 2 additional USB 2.0
ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
ASRock I/O Plus
the front panel USB ports by
attaching the front panel USB
cable to this connector (USB45),
the USB ports 4,5 on ASRock I/O
TM
Plus
will not be able to function.
This connector supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
CD1
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
AUX1
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
AUD-OUT-L
TM
provides you
TM
. When using
Advertisement
Table of Contents
