Uniden BC355N Owner's Manual page 34

If You Want to do
This -
Stop scanning
Resume scanning
34
Here's How -
Press HOld. The scanner stays on the
displayed channel until scanning is
resumed. The bank's screen label remains
steady and does not flash.
Press one of the following keys to continue
scanning:
HOld – Press this key to release the Scan
•
Hold and continue scanning. The bank's
screen label resumes flashing.
UP or dOWN - Press these keys to step to
•
the next/previous frequency. Scan Hold
remains active but single channels can be
monitored.
• Any bank key - If you press a different
bank key, you will start scanning in that
new bank and the bank label will resume
flashing.
• L/O key - Press this key to lock out this
frequency and step to the next frequency