Table of Contents
Advertisement
(that is, your phone number), and b) The telephone equipment's FCC registration number
and ringer equivalence number (REN). These numbers are on the back or bottom of your
telephone equipment. The REN is used to determine how many devices you may connect
to your telephone line and still have them ring when your telephone line is called. In most,
but not all areas, the sum of all REN's should be 5 or less. You may want to contact your
local telephone company.
Repair Instructions
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it
not be used and that it be unplugged from the modular outlet until the problem has been
corrected. Repairs to the telephone equipment can only be made by the manufacturer or
its authorized agents or by others who may be authorized by the FCC.
For repair
procedures, follow instruction outlined under the "Limited Warranty".
Rights of the Telephone Company
If your product is causing harm to the telephone network, the telephone company may
temporarily discontinue your telephone service. If possible, they'll notify you before they
interrupt service. If advance notice isn't practical, you'll be given the opportunity to correct
the problem, and you will be informed of your right to file a complaint with the FCC notified
as soon as possible.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the proper functioning of your product. If such changes are
planned, you will be notified.
Interference Information: Part 15 of FCC Rules
Some telephone equipment generates, uses, and can radiate radio-frequency energy and,
if not installed and used properly, may cause interference to radio and television reception.
Your product has been tested and found to meet the standards for a Class B digital device,
as specified in Part 15 of the FCC Rules. These specifications are designed to provide
reasonable protection against such interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation.
If your product causes interference to radio or television reception when it is in use, you
might correct the interference with any one or all of these measures: (a) where it can be
done safely, reorient the receiving television or radio antenna. (b) To the extent possible,
relocate the television, radio or other receiver with respect to the telephone equipment. (c)
If your telephone product runs on AC power, plug your product into an AC outlet
that is not on the same circuit as the one used by your radio or television.
Page 19
Hide quick links:
Advertisement
Table of Contents
