EnGenius ENH200EXT User Manual page 45

Aggregation
Wireless Traffic
Shaping
Incoming Traffic Limit
Outgoing Traffic Limit
Accept / Cancel
Please make note of the following:
1. Changing Wireless Advanced Settings may lower the wireless connection quality. Please
keep all settings as default unless you understand the modifications which you have made.
2. Accept does not apply the changes; you must go to Status -> Save / Load to apply the new
settings. Please refer to Chapter 4.1 for more information.
Aggregation is to merge the typical size of data's header to one
data. It is useful for the small size but more packets.
Place a check to enable Wireless Traffic Shaping function.
Specify the wireless transmission speed for incoming traffic.
Specify the wireless transmission speed for outgoing traffic.
Press Accept to confirm the changes or Cancel to return
previous settings.