Dell Precision T1650 Owner's Manual page 43

Option
Block Sleep
Table 7. POST Behavior
Option
Numlock LED
Keyboard Errors
POST Hotkeys
Table 8. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Table 9. Maintenance
Option
Service Tag
Asset Tag
Description
• Disabled - Does not allow the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN.
• LAN Only - Allows the system to be powered on by special LAN signals.
This option is Disabled by default.
This option lets you block entering to sleep (S3 state) in operating system
environment.
• Block Sleep (S3 state) - This option is disabled by default.
Description
Specifies if the NumLock function can be enabled when the system boots. This option
is enabled by default.
Specifies whether keyboard related errors are reported when it boots. This option is
enabled by default.
Specifies whether the sign-on screen displays a message, that displays the keystroke
sequence required to enter the BIOS Boot Option Menu.
• Enable F12 Boot Option menu - This option is enabled by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
• Enable Intel Virtualization Technology for Direct I/O - This option is enabled
by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
• Trusted Execution - This option is disabled by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
43