Clarion NX702 Installation Manual page 155

Tap this button to reveal the below options.
Tap this button to create your own vehicle profile.
Tap this button to reset all vehicle profiles to their default settings.
When creating a new vehicle profile, first you need to select the vehicle type. Then you need to set the
following parameters (some of them may not exist for the selected vehicle type). You can modify the
same parameters when you edit an existing profile:
Button
Tap this button to rename the profile for something meaningful.
Enter the average consumption of your vehicle when used in built-up areas. The
unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle when used on highways. The unit
for consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
emission.
Enter the average fuel price for travel cost calculation. The currency can be set in
Regional Settings.
Set the maximum speed you travel with the vehicle.
Check this box to enable more settings for the below parameters.
Set the total length of the vehicle.
Set the width of the vehicle.
Set the height of the vehicle.
Set if there is a trailer attached to the vehicle.
Set the maximum allowed weight of the vehicle.
Set the actual weight of the vehicle.
Description
2
NX702 English 91