Kenwood DDX719 Instruction Manual page 62

Menu items Selectable setting/item
Connection ♦ Connect
♦ Disconnect
PIN Code Changes the PIN code of the unit.
• Enter a new PIN code, then press [Enter].
Device Name Shows the device name to be shown on the Bluetooth device — "KENWOOD
BT MM-6U2. "
Device Shows the device address of the unit.
Address
Phone Shows the connected phone device name.
Device* 1
Audio Shows the connected audio device name.
2
Device*
Auto ♦ OFF
Connect
♦ ON
Bluetooth Select the speakers used for Bluetooth (both phone use and audio player).
HF/Audio
♦ Front Only
♦ All
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
Auto ♦ OFF
Response* 1
♦ ON
1
SMS Notify* ♦ OFF
♦ ON
Ring Mode* 1 ♦ System
♦ Phone
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring
Change* 1 tone for received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message
Tone
* Handsfree Mode
1
Appears only for <
* Bluetooth Mode
2 Appears only for <
62
DDX719/DDX7049BT/DDX419/DDX4049BT/DDX319/DDX3049
: ☞ page 55
: ☞ page 55
: Cancels.
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: From front speakers only.
: From all speakers.
: The unit does not answer the calls automatically. Answer
the calls manually.
: The unit answers the incoming calls automatically within
5 seconds.
: The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing
and displaying "Receiving Message. "
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
>.
>.
Initial: Underlined