Install Remote Control Battery - Philips PD9000 User Manual

2
Connect the supplied AC adaptor to the player and to the AC outlet.
» The CHR indicator turns on (red). It takes about 7 hours to
fully charge the battery.
» When the battery is fully charged, the CHR indicator turns
off.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
•
Batteries contain chemical substances, they should be disposed of properly.
•
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
EN
18