Flow Of Installation - Canon LV-8227A User Manual

Flow of installation

To use the projector via the networks, follow the setup procedures below.
STEP 1
Connect the LAN and set the configuration.
Decide depending on the LAN environment.
Detailed LAN configurations need to be done with a browser later.
First, complete the Wired LAN connection between computers and projec-
tors, then start browser configurations.
STEP 2
Network Configuration has completed.
Follow each chapter to operate the projector.
■ Operate and manage the projector ➔ "4. Controlling the projector" (pp.31-42)
➔ "2. Setup Procedures" (pp.11–16).
➔ "3. Basic setting and operation" (pp.17–30).
➔ "Power Control and status check" (p.32-33)
➔ "PC Adj. " (p.34)
➔ "Control" (p.35-37)
➔ "Setting up the projector" (p.38-40)
➔ "Projector information" (p.41)
Flow of installation
9