Completing The First-Time Setup - Vizio E500AR User Manual

Completing the First-Time Setup

The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
To complete the first-time setup:
1. Press the Power button on the
remote. The TV powers on and
the Setup App starts.
2. Use the Up/Down Arrow
buttons on the remote to
highlight Home Mode Setup
and press OK.
3. Use the Up/Down Arrow
buttons on the remote to
highlight your time zone and
press OK.
4. Set up Daylight Saving time.
Use the Up/Down Arrow
buttons to highlight On or Off
and press OK.
Select On when Daylight
Saving is in effect.
5. Press OK, then use the Up/
Down Arrow buttons to select
Cable or Antenna and press
OK.
6. Highlight Being Scan and press
OK to start channel scan.
7. When you have finished the
channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.
• Unless otherwise stated, the Menu illustrations in this
user guide are based on the E240AR.
• Depending on the input source, the menu items
may be different. Unless otherwise stated, the Menu
illustrations in this user guide are based on TV input.
22
4