Table of Contents
Advertisement
Hiding the image
In order to draw the audience's full attention to the presenter, you can use
projector or Blank on the remote control to hide the screen image. Press any key on the
projector or remote control to restore the image. The word 'BLANK' appears at the lower
right corner of the screen while the image is hidden.
You can set the blank time in the
let the projector return the image automatically after a period of time when there is no action
taken on the blank screen.
Once Blank is pressed, the projector enters Economic mode automatically.
CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except
1.
Press
on the projector or Lock
SETTING: BASIC > Panel Key Lock menu
the projector or remote control.
2.
A confirmation message is displayed. Select Yes to confirm.
To release panel key lock, press and hold
control for 3 seconds.
You can also use the remote control to enter the SYSTEM SETTING: BASIC > Panel
Key Lock menu and press
•
Keys on the remote control are still functional when panel key lock is enabled.
•
If you press
I
I
projector will still be in locked status the next time it is turned on.
Freezing the image
Press Freeze on the remote control to freeze the image. The word 'FREEZE' will be
displayed in the upper left corner of the screen. To release the function, press any key on the
projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen on screen.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 1500
m–3000 m above sea level, and temperature is between 0°C–35°C.
CAUTION
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under
such a condition.
SYSTEM SETTING: BASIC > Blank Timer
/
to select Off.
POWER to turn off the projector without disabling panel key lock, the
35
I
I
POWER.
on the remote control, or go to the
, and select On by pressing
on the projector or Lock
on the
menu to
SYSTEM
/
on
on the remote
Hide quick links:
Advertisement
Table of Contents
