HP D5970A - NetServer - LCII Reference Manual page 35

Rack assembly and cabling reference guide

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

Chapter 3

Figure 3-3. Connecting the Data Cables between the LXr 8500

2. Locate any network and remote management connections from hubs,

routers and other sources and connect their cables to corresponding server

connectors.

3. Locate the cable that will attach the serial port on the Uninterruptible

Power Supply (UPS) (if present) and plug the server end in.

4. Attach the video cable to the video port on the server. Attach the mouse

and keyboard cables to the server. If you are using one keyboard, mouse,

Procedure for Connecting and Routing Cables to the LXr 8500

and Rack Storage/12FC

Table of Contents