Table of Contents
Advertisement
12 www.electrolux.com
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1.
Connect the wire coloured green and
yellow to the terminal marked either
with the letter "E" or by the earth
symbol
low.
2.
Connect the wire coloured blue to the
terminal either marked with the letter
"N" or coloured black.
3.
Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4.
Check that no cut, or stray strands of
wire is present and the cord clamp D
is secure over the outer sheath.
7.3 Ventilation requirements
5 cm
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
OK
or coloured green and yel-
min.
200 cm
2
min.
200 cm
5.
Make sure the electricity supply volt-
age is the same as that indicated on
the appliance rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a 13
amp ASTA approved (BS 1362) fuse must
be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
The airflow behind the appliance must be
sufficient.
2
HISSS!
BRRR
!
Advertisement
Table of Contents
