Table of Contents
Advertisement
ATX 12V Power Connector
(8-pin ATX12V1)
(see p.2 No. 1)
Though this motherboard provides 8-pin ATX 12V power connector, it can still work
if you adopt a traditional 4-pin ATX 12V power supply. To use the
4-pin ATX power supply, please plug your power supply along with
Pin 1 and Pin 5.
Serial port Header
(9-pin COM1)
(see p.2 No. 31)
HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(
see p.2 No. 32)
Chassis Intrusion Header
(2-pin CI1)
(see p.2, No. 30)
XFire Power Connector
(4-pin CROSS_FIRE_PWR1)
(see p.2 No. 42)
ASRock FM2A85X Extreme6 Motherboard
Please connect an ATX 12V
4
8
power supply to this connector.
1
5
4-Pin ATX 12V Power Supply Installation
This COM1 header supports a
serial port module.
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
This motherboard supports
CASE OPEN detection feature
1
GND
that detects if the chassis cover
Signal
has been removed. This feature
requires a chassis with chassis
intrusion detection design.
It is not necessary to use this
connector, but please connect it
with a hard disk power
connecor when two graphics
CROSS_FIRE_PWR1
cards are plugged to this
motherboard.
4
8
1
5
29
Advertisement
Table of Contents
