ASROCK FM2A75M-DGS R2.0 Quick Installation Manual page 3

I/O Panel
1
11 10
1 PS/2 Mouse Port (Green)
* 2 LAN RJ-45 Port
3 Line In (Light Blue)
** 4 Front Speaker (Lime)
5 Microphone (Pink)
*** 6 USB 2.0 Ports (USB23)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity/Link LED
Status Description
Off No Link
Blinking Data Activity
On Link
** To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. Please refer to below steps for the software setting of Multi-Streaming.
After restarting your computer, please double-click "Realtek HD Audio Manager" on the
system tray. Set "Speaker Configuration" to "Quadraphonic" or "Stereo". Click "Device
advanced settings", choose "Make front and rear output devices playbacks two different audio
streams simultaneously", and click "ok". Then reboot your system.
*** It is recommended to install the USB Keyboard/Mouse cable to USB 2.0 ports (USB01 or
USB23) instead of USB 3.0 ports.
ASRock FM2A75M-DGS R2.0 Motherboard
9
7
*** 8
9
10
11
SPEED LED
Status Description
Off 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
2
8 7 6
USB 3.0 Ports (USB3_01)
USB 2.0 Ports (USB01)
DVI-D Port (DVI1)
D-Sub Port (VGA1)
PS/2 Keyboard Port (Purple)
ACT/LINK
LED
LAN Port
3
4
5
SPEED
LED
3