Turn It On & Off; Make A Call; Answer A Call - Motorola MOTORAZR Series User Manual

software drivers are available in Motorola Original data
kits, sold separately.
Tip: Motorola batteries have circuitry that protects the
battery from damage from overcharging.
turn it on & off
Caution: On power up, the phone may prompt you to
enter your SIM card PIN code to unlock the SIM card.
If you enter an incorrect PIN code three times before
the correct code, your SIM card is disabled and your
display shows SIM Blocked. Contact your service provider.
To turn on your phone, press
and hold the power key
until the keypad or display
lights up. If prompted, enter
your eight-digit SIM card PIN
code and/or four-digit unlock
code.
O
To turn off your phone, press and hold
seconds.

make a call

Enter a phone number and press the send key
make a call.
To "hang up, " close the flip or press the end key
Note: Closing the phone flip doesn't end a call when
the handsfree speaker is turned on (for more
information about the handsfree speaker, see
page 38).

answer a call

When your phone rings and/or vibrates, just open the
phone flip or press the send key
To "hang up, " close the phone flip or press the
O
end key .
O
for a few
N
to
O
N
to answer.
Use and Care 15
.